You are here: Link > Control Center
 
 

Control Center

Control Center is a licensed module in IXM WEB that helps to send transactions / events from a Device to the IndigoVision Control Center.

 

The events are sent from IXM Web (Data Adapter Service ) to the Control Center with the help of the provided SDK. Based on these events, the system administrator can configure various actions such as Video pop-up, start recording, and many more in IndigoVision.

Screen Layout of Control Center

 

Field Description of Control Center

 

Toggle the Status switch to enable the Control Center. The following options will be displayed:

Click on button to download the Data Adapter Service. Read more...

 

Source IP Address:

Enter the IP Address where the IV Configuration has been installed.

 

Alarm Server IP Address:

Enter the IP Address where the event has to be sent, IndigoVision Control Center in this case.

 

Send Live Only

Click on the checkbox to enable or disable this feature. A check mark indicates the feature is enabled.

 

Enabling this feature will send only live transactions (received within 30 seconds) to the Control Center. For example, if for any reason the IXM Device goes offline or the Control Center server is down, only those transactions that took place within the first 30 seconds will be sent to the Control Center.

.

Disabling this feature will keep sending the transactions to the Control Center as and when the communication between the Device and the Control Center is successful.

 

Global Events

Select this option by clicking on it you want to apply the Video Management settings to all the registered Devices.

 

Device Events

Select this option by clicking on it you want to apply the Video Management settings to a particular Devices. The following option will be displayed to select the Device:

 

Select Device:

A list of registered Devices will be displayed. Select the required Device from the dropdown list.

Send Events

Click on the checkbox to send the configured events from the selected Device to the Control Center. A check mark indicates the feature is enabled.

 

Disabling this feature will configure the events but will not send any event from the selected Device to the Control Center.

 

AVAILABLE

This section displays a list of events that can be sent from the Device to the Control Center as follows:

 

 

The following is the list of events:

  • Anti-Shock Alarm detected

  • Identify Duress

  • Failed to Identify

  • Identified

  • Verify Duress

  • Failed to Verify

  • Verified

  • Door Close

  • Door Forced Open

  • Door Open

  • Door Open too Long

Click on the + icon next to the Event to select it. The Event will be moved to the SELECTED list.

 

SELECTED

This section displays a list of selected Events as follows:

 

Event Number:

Enter the Number for the selected Event.

 

Click on the x icon next to the Event to remove it from the SELECTED list and move it back to the AVAILABLE list.

 

Information

Only the selected events will be sent to the Control Center.

 

Click on the Export button to export and download the configuration in an excel file. The file will be named as "VideoManagement_IndigoVision" + "_" + dd-month-yyyy + "_" + hh-mm-ss

Information

Only the Device Events will be exported to the excel file.

 

Click on Apply button to save the configuration. Click on Reset button to remove the existing configuration.

 

The Video Management settings for a particular Device can be broadcast to one or more Device(s). A list of Devices under their respective Device Groups will be displayed as follows :

 

 

Search:

You can search for a particular Device by entering its full or partial name. Once entered, either press <Enter> key or click on Search button. The list will be refreshed with Devices matching with the entered name.

 

Select the destination Device(s) where the settings need to be copied by clicking on their respective checkboxes.

 

Once done, click on OK button to initiate the broadcasting process.